Suunto
(→Handling) |
(→General description) |
||
| Line 3: | Line 3: | ||
==General description== | ==General description== | ||
| − | The Suunto ([figure 1]) is a device that is used to measure slope and tree | + | The Suunto ([figure 1]) is a device that is used to measure [[Measuring slope|slope]] and [[tree height]]s within fixed distances (15m, 20m) to the tree using the [[trigonometric principle]]. Therefore the inclination angles to the tree top and bottom are measured from fixed distances. Tree height can then be read from the scales for the respective distance. Some Suunto devices have an optical rangefinder to measure these fixed distances (15m, 20m) optically and a sighting viewer to look on the height scales. The scales implemented are the same as the scales of [[Clinomaster]], but there is additionally a scale for slope measurements in %. |
<gallery widths=300px heights=300px> | <gallery widths=300px heights=300px> | ||
Revision as of 20:13, 4 July 2012
 |
sorry: |
This section is still under construction! This article was last modified on 07/4/2012. If you have comments please use the Discussion page or contribute to the article! |
Contents |
General description
The Suunto ([figure 1]) is a device that is used to measure slope and tree heights within fixed distances (15m, 20m) to the tree using the trigonometric principle. Therefore the inclination angles to the tree top and bottom are measured from fixed distances. Tree height can then be read from the scales for the respective distance. Some Suunto devices have an optical rangefinder to measure these fixed distances (15m, 20m) optically and a sighting viewer to look on the height scales. The scales implemented are the same as the scales of Clinomaster, but there is additionally a scale for slope measurements in %.
Figure 1a: Front
Figure 1b: Back
Handling
- Select desired distance (15m, 20m) to the tree,
- Sight the tree bottom with both eyes open (figure 2) and remember the value,
- Sight the tree crown (figure 3) and remember the value,
- Tree height is calculated as \[ {h_t} = {h_c} - {h_b} \] (see also the trigonometric principle).
Figure 2: Live view trunk bottom measurement
Figure 3: Live view crown measurement
To measure tree heights, aim the Suunto with both eyes open so that the hairline is superimposed. When the hairline is at the right level (e.g. bottom of the trunk) and the clinometer has stopped oscillating, remember the measurement value and measure the tree crown as you did before.
The difference between the crown height and the bottom value is the tree height:
Htotal = hcrown – hbottom
| Advantages | Disadvantages |
|---|---|
| slope correction implemented | measurement result needs to be remembered |
| optical distance measurement | fixed distances to the tree (could be difficult in closed forest stands) |
| independence of power sources (no batteries needed) | in dark forest stands optical measurement is difficult, no digital storage of measurement results available. |
