Differential Global Positioning System (DGPS)
| Line 6: | Line 6: | ||
For this reason, a GPS positioning to a point with known absolute coordinates is conducted simultaneously to the to the current GPS positioning. From the difference of the known (correct) coordinates and those obtained from the measuring to the reference point, the deviation can be calculated and used for the correction of other points. | For this reason, a GPS positioning to a point with known absolute coordinates is conducted simultaneously to the to the current GPS positioning. From the difference of the known (correct) coordinates and those obtained from the measuring to the reference point, the deviation can be calculated and used for the correction of other points. | ||
| + | |||
| + | |||
Revision as of 18:54, 15 April 2011
 |
sorry: |
This section is still under construction! This article was last modified on 04/15/2011. If you have comments please use the Discussion page or contribute to the article! |
Some of the interference factors cannot be definitely quantified (e.g. the current state of the atmosphere and it's influence on the signal runtime).
Still, these interferences equally effect neighboring points; thus, the relative positioning (the position of the points to each other) is far more precise than the absolute position (in the WGS 84). Here, “neighboring” means distances to about 100 km. The functional principle of DGPS is to quantify the deviation of the measured position to the actual coordinates on the earth's surface.
For this reason, a GPS positioning to a point with known absolute coordinates is conducted simultaneously to the to the current GPS positioning. From the difference of the known (correct) coordinates and those obtained from the measuring to the reference point, the deviation can be calculated and used for the correction of other points.
