Trimble Juno GPS

sorry:

This section is still under construction! This article was last modified on 11/16/2013. If you have comments please use the Discussion page or contribute to the article!

This exercise is part of the QGIS Tutorial 2013/14.
In this exercise you'll get an introduction on how to handle a GPS receiver and how to process data in QGIS

During the practical exercise, we work with the GPS receiver Trimble Juno 3B by Trimble navigation. Of course, there are different GPS navigation devices on the market, supplied by several manufacturers, e.g. those listed wikipedia page.

Getting started with the GPS receiver

1. Press the power button for a few seconds
2. Open the windows menu and select TerraSync --> Professional Edition. Wait for a few minutes, until you get a connection to at least three satellites. As soon as you are connected to the satellites, you are ready to navigate.
3. Set the coordinate system and other parameters
4. To set the coordinate system and other parameters, select