Exercise: Mapping storm damaged forest areas

Definition of storm damage

Mapping of forest damages caused by storms using visual interpretation of very high resolution digital ortho photos (DOP) need clear definitions and characteristics which are usually documented as interpretation keys. Here, clearings are defined with a minimum area = 0.2ha, minimum width = 20m, minimum tree crown cover = 10%.

Characteristics of windthrow areas depend on the time between storm events and the availabiltiy of optical remote sensing images but also on the status and progress of logging and clearing operations at the time of the image aqcuisition. Typical characteristics for recognizing storm damages are: horizontal complete trees with root plates, root plates, stumps with fresh cross section, piles of logs for storage / skidding, piles of branches, skid roads and tracks, no or few ground vegetation.

Digitizing of a windthrow area

Load and display German Geoadata following the Exercise: Displaying German Geobasis data (GBD) or load the saved project file GBData\display_gbd.qgs where the project coordinate reference system (CRS) is set to ETRS89 / UTM32N (EPSG:25832).

1. Create a new shapefile layer
   1. Select Layer --> New --> New Shapefile Layer.
      • As layer type, select Polygon. Click the Specify SRS button and select WGS 84/Pseudo Mercator (EPSG:3857).
      • To add an attibute:
        • For the attribute's name type (Class into the Name field of the New attribute section.
        • Select Whole number as data type.
        • Confirm with Add to attributes list.
      • Confirm with OK and enter the path and name (e.g. Training) in the following menu.
2. Digitizing areas
   1. Open the file digitizing_classes.pdf from the course data for a reference of landscape classes.
   2. Select the new shapefile in the TOC. Start the edit mode by clicking the Toggle editing button .
   3. Zoom in on a sample point (figure D). Click Add feature to start digitizing. Draw polygons according to the landscape classes. Simply click the desired point on the canvas to start. After selecting a second point, the third point will construct a triangle and each additional point will add another triangle to the geometry. Finish the geometry by right-clicking and entering the attributes in the appearing window (just use an increasing number for the ID). Take your time to get used to this way of digitizing -- you can always delete the last polygon by simply clicking Cancel in the attributes dialogue, or by selecting it and deleting with the Delete selected button. An example of a finished sample point can be seen in figure E.