Finn caliper

From AWF-Wiki
Revision as of 18:45, 17 February 2011 by Aspange (Talk | contribs)

Jump to: navigation, search
Attention.png Attention!: 

This article must be enhanced to meet the AWF-Wiki quality standards! Please visit the Discussion Page of this article for details!
Help to improve this article about Finn caliper if you can!

Forest mensuration lecture notes


The Finn caliper (also called Finnish parabolic caliper) is used to measure the stem diameters at (or up to) 7 m (d7m). Figure 1 gives an illustration. By its name, it is originally from Finland and is being used in Northern European countries as well as in Germany and Switzerland. With pole and caliper, the height of 7 m has been found to be the maximum still manageable one; that is, it had been defined for practical reasons only.

Figure 1 The Finn caliper: fixed on a pole the tree diameter can be read up to a height of 7m (Keller 2005[1]).

The Finn caliper is relatively difficult to carry in the forest because the device consists of several calipers and various poles that are put together for the measurement.

References

  1. Keller M. (ed.). 2005. Schweizerisches Landesforstinventar. Anleitung für die Feldaufnahmen der Erhebung 2004-2007

Personal tools
Namespaces

Variants
Actions
Navigation
Development
Toolbox
Print/export