Tree height

sorry:

This section is still under construction! This article was last modified on 11/3/2010. If you have comments please use the Discussion page or contribute to the article!

General comments

Total tree height is defined to be the perpendicular distance between the ground level and the level of the top of a tree. In contrast tree length is the distance between the stem foot and the top along the stem axis. Obviously tree height and tree length are identical as long as the tree is growing vertically. For oblique trees, the difference between height and length becomes relevant and length is larger than tree height, depending on the inclination angle.

Measurement of tree height

A direct measurement of tree height (e.g. by means of a pole) is only feasible for relatively small trees and restricted to the assessment of regeneration or younger plantations. More common is the estimation of tree height based on the trigonometric principle or the geometric principle. Many different Category:Measurement devices are available, while most of the modern ones calculate tree height based on measured distances and angles.

Potential errors in tree height measurements

In general errors in the determination of tree heights can have different reasons:

• wrong distance measurement (eventually not the correct horizontal distance),
• Wrong measurement of angles,
• Tree top is not visible or misinterpreted,
• misinterpretation of tree height in case of oblique trees.