Haga
From AWF-Wiki
(Difference between revisions)
| Line 4: | Line 4: | ||
==General description== | ==General description== | ||
Haga is a device to measure tree heights within distances of 15, 20, 25 and 30m to the tree by the [[trigonometric principle]].The distance to three can optically be determined. Additionally there is a scale for slope measurements in % implemented. Therefore a levelling board is available. | Haga is a device to measure tree heights within distances of 15, 20, 25 and 30m to the tree by the [[trigonometric principle]].The distance to three can optically be determined. Additionally there is a scale for slope measurements in % implemented. Therefore a levelling board is available. | ||
| + | |||
| + | <gallery widths=300px heights=300px> | ||
[[file: haga01_portrait.jpg|thumb|300px|Figure 1: Haga altimeter]] | [[file: haga01_portrait.jpg|thumb|300px|Figure 1: Haga altimeter]] | ||
| − | |||
[[File:using haga.jpg|thumb|300px|Using a Haga altimeter]] | [[File:using haga.jpg|thumb|300px|Using a Haga altimeter]] | ||
| + | </gallery> | ||
==Handling== | ==Handling== | ||
The handling of the Haga is similar to the [[Blume Leiss]]. A button enables the actor to lock the needle where the measurement value can be read. | The handling of the Haga is similar to the [[Blume Leiss]]. A button enables the actor to lock the needle where the measurement value can be read. | ||
| − | <gallery | + | <gallery widths=300px heights=300px> |
[[file: haga02_measurement-bottom.jpg|thumb|300px|Figure 2: Live view measuring tree bottom]]. | [[file: haga02_measurement-bottom.jpg|thumb|300px|Figure 2: Live view measuring tree bottom]]. | ||
| − | |||
[[file: haga03_measurement-top.jpg|thumb|300px|Figure 3: Live view measuring tree crown]] | [[file: haga03_measurement-top.jpg|thumb|300px|Figure 3: Live view measuring tree crown]] | ||
| + | <gallery> | ||
| + | |||
| + | Remember the value and measure the crown. | ||
The difference between the measurements will be tree height – | The difference between the measurements will be tree height – | ||
:<math> {h_t} = {h_c} - {h_b} </math>. | :<math> {h_t} = {h_c} - {h_b} </math>. | ||
Revision as of 15:14, 12 June 2012
 |
sorry: |
This section is still under construction! This article was last modified on 06/12/2012. If you have comments please use the Discussion page or contribute to the article! |
General description
Haga is a device to measure tree heights within distances of 15, 20, 25 and 30m to the tree by the trigonometric principle.The distance to three can optically be determined. Additionally there is a scale for slope measurements in % implemented. Therefore a levelling board is available.
Handling
The handling of the Haga is similar to the Blume Leiss. A button enables the actor to lock the needle where the measurement value can be read.
- Remember the value and measure the crown.
- The difference between the measurements will be tree height –
- The difference between the measurements will be tree height –
